home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.dcom.modems
- Path: lazrus.cca.rockwell.com!news
- From: atels_rah@hobbes.cca.rockwell.com (Robert Harmon)
- Subject: Re: New USR 28.8 (33.6) will not auto-answer
- X-Nntp-Posting-Host: pc1288.cca.rockwell.com
- Message-ID: <DMJ396.Hp0@lazrus.cca.rockwell.com>
- Sender: news@lazrus.cca.rockwell.com
- Organization: Rockwell-Collins Cedar Rapids, IA.
- X-Newsreader: WinVN 0.92.6
- References: <DMJ2H5.H46@lazrus.cca.rockwell.com>
- Date: Fri, 9 Feb 1996 21:48:42 GMT
-
- In article <DMJ2H5.H46@lazrus.cca.rockwell.com>, atels_rah@hobbes.cca.rockwell.com (Robert Harmon) says:
- >
- >We have two new USR 28.8 externals, neither will auto-answer.
- >Dip switches: 1 UP - Normal DTR
- > 2 UP - Verbal result codes
- > 3 DOWN - Display result codes
- > 4 UP - Echo kybd
- > 5 UP - Auto answer on 1st ring or higher if
- > specified in NVRAM
- > 6 UP - Normal CD
- > 7 UP - Load NVRAM defaults
- > 8 DOWN - Smart mode
- >
- >Using Procomm Plus for DOS at 9600 N81:
- > &B1 &C1 &D2 &M4 Q0 V1 X4 Y0 S0=1 are displayed on ATI4 screen.
- >Typing AT gives OK. Should now be in auto-answer. AA is lit.
- >Other modem calls in. Modem will not auto answer. It WILL answer
- >if I type ATA. Then everythings fine. Can type text both ways.
- >Whats the secret to get these to auto-answer?
- >I've read the USR Technical Reference Guide with no clues.
- >Thanks for any comments!
- >
-
- Forgot to mention that these are SPORTSTER external modems.
-
- Bob Harmon
- Collins Commercial Avionics
- Cedar Rapids, IA.
-